Ecocolla is specifically designed as an adhesive for laying, for inside and outside use. It is an improved cement-based adhesive, with good slip resistance, extended open time and high thixotropy. Available in 25 kg bags. Colours: White or Grey. Ecocolla, when mixed with water, becomes a soft mixture that is very easy to apply. When combined with Ecorete fibreglass mesh, it is also a suitable adhesive for reinforced concrete skim coat consolidation of unstable substrates or for supporting reinforcement on external thermal insulation.
Ecorete is a fiberglass net with 16.7×16.1 mm mesh, with anti-alkaline coating treatment, with specific weight higher than 300 g/m². It is suitable for non-solid laying bases and with a mechanical strength that is not sufficient to support Pietraeco manufactured stone covering.
Ecorete (1) has to be drowned in a double skin coat of Ecocolla (2) end properly fixed with plugs Ecotasselli (3) 4 to 7 pieces per square meter may be required according to the product selected and the laying bottom.
− Plugs
Ecotassello
Ecotassello is the universal plug that together with Ecocolla and Ecorete reinforces the laying when the mechanical strength levels are not enough to support Pietraeco.
Isotassello
To reinforce the installation of Pietraeco coatings on thermal insulation mechanical fixing is recommended through the use, together with Ecocolla and Ecorete, of Isotasseli, anchoring plugs for thermal insulation with a thermal-insulated steel screw.
Woodtassello
The mechanical fixing of Pietraeco facing on wooden insulation on wooden structures involves the use, together with Ecocolla and Ecorete , of Woodtasselli, specific plugs with a tropicalized screw for wood.
− Grout
Ecostucco
Ecostucco is a specifically designed grout for Pietraeco manufactured stones joints and is prepared on the basis of their characteristics. Ecostucco is a pre-mixed powdered hydraulic binder based grout. Suitable for grouting indoor and outdoor manufactured stones joints. Available in 25 kg bags and a choice of 6 colours. Its fluidity makes Ecostucco suitable for application using a special piping bag to penetrate the joints fully. Does not drain, if prepared to the right consistency, and so does not dirty the stone. Does not shrink while drying and adheres perfectly to stone walls and substrates.